One less worry with
How one bowl goes into bathrooms that were plumbed differently.
One patented trap that lets a toilet bowl meet the waste pipe wherever your bathroom happens to put it.
Setout is the distance from the finished wall behind your toilet to the centre of the waste pipe in the floor. Singapore bathrooms were never built to a single number. VersaFit™ covers six of them, from 100mm out to 350mm.
All six are S-trapAll six are S-trap setouts, where the waste runs down through the floor. That is how most Singapore bathrooms are plumbed.
Same bowl at either endThere is no 200mm version and a separate 300mm version to pick between. The trap does the adjusting.
An ordinary trap leaves the factory with its outlet fixed in one place, and the floor pipe has to be sitting exactly there. VersaFit™ is a multi-pipe trap: the connection is made where your pipe already is.
It is Starke’s own patented design rather than a bought-in part. That is why the range can name a span of setouts instead of one measurement.
Measure once, from the wall to the centre of the outlet. If the number lands anywhere between 100mm and 350mm, you are choosing a bowl on how it looks and what it does.
HDB, condominium and landed homes were not plumbed to one measurement. The span from 100mm to 350mm covers all three.
The trap meets the pipe where your block put it. No special order, no different model.
Developments differ from one another. The same six setouts cover them.
Bigger bathrooms, older plumbing, or both. Still the same bowl.
It takes a tape measure and about a minute.
Look for the waste pipe in the floor behind your current toilet, or the two bolt caps sitting either side of it.
From the finished wall behind the toilet to the centre of that outlet. Straight line, in millimetres.
That number is your setout. Match it to the six below and you have your answer.
Send a photo of your bathroom to WhatsApp on +65 8066 5401 and we will tell you what you are working with.
Every freestanding Starke toilet bowl. It comes as standard on all of them.
Send a photo of the bathroom and we will tell you which bowls go in. WhatsApp +65 8066 5401.
Message usLavender
116 Lavender Street, #01-03 Pek Chuan Building, Singapore 338730
Tampines
1 Tampines North Drive 1, #01-18 T-Space Building, Singapore 528559
Both open 11am to 8pm, daily.
Showroom detailsOur specialists can tell you what will go into your bathroom before you commit to anything.
+65 8066 5401The setout is the distance from the finished wall behind the toilet to the centre of the waste outlet in the floor. Measure it in a straight line, in millimetres. It is the single number that decides whether a bowl sits flush against the wall.
S-trap setouts of 100mm, 150mm, 200mm, 250mm, 300mm and 350mm can all be fitted by the same patented VersaFit™ multi-pipe trap.
It helps, and it is worth a minute with a tape measure. If you would rather not, send a photo of your bathroom to WhatsApp on +65 8066 5401. A specialist can also come and measure the space for you before you commit to anything.
Yes, and in condominiums and landed properties too. The patented VersaFit™ multi-pipe trap connects to the different toilet flushing systems found across Singapore, which is why the same bowl goes into all three.
Every freestanding Starke toilet bowl has it. See them all on the toilet bowls page.
Setout measurements refer to S-trap installations. Delivery is free on orders of $300 and above including GST, a flat $30 before GST below that, and installation is quoted separately.